Bee door knocker
  1. Place the bee in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 2 holes are on the bee door knocker so that the pen can be visible on the door once the bee has been taken away.
  3. Using a drill, make 2 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the bee back onto the door, aligning the screw holes on the bee with the two holes you’ve created.
  5. Using the 2 screws provided, screw the bee to your door.

Shell door knocker
  1. Place the shell in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 2 holes are on the shell door knocker so that the pen can be visible on the door once the bee has been taken away.
  3. Using a drill, make 2 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the shell back onto the door, aligning the screw holes on the bee with the two holes you’ve created.
  5. Using the 2 screws provided, screw the shell to your door.

Dragonfly door knocker
  1. Place the dragonfly in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 2 holes are on the Dragonfly door knocker so that the pen can be visible on the door once the bee has been taken away.
  3. Using a drill, make 2 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the dragonfly back onto the door, aligning the screw holes on the bee with the two holes you’ve created.
  5. Using the 2 screws provided, screw the dragonfly to your door.

Paw door knocker
  1. Place the Paw in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 2 holes are on the Paw door knocker so that the pen can be visible on the door once the bee has been taken away.
  3. Using a drill, make 2 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the Paw back onto the door, aligning the screw holes on the bee with the two holes you’ve created.
  5. Using the 2 screws provided, screw the Paw to your door.
 
Heart door knocker
  1. Place the heart in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the hole is on the top of the heart door knocker so that the pen can be visible on the door once the heart has been taken away.
  3. Using a drill, make a small hole into the door on the markings you created in the previous step (Ensuring the drill hole goes through both sides of the door)
  4. Place the heart back onto the door, aligning the screw hole on the heart with the hole you’ve created.
  5. Using the screw provided, screw the heart to your door.
  6. Repeat the above step with the smaller heart ensuring that it is in the correct position for the bottom of the large heart to knock on to.

Hare door knocker
  1. Place the hare in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the holes are on the back of the hare door knocker so that the pen can be visible on the door once the hare has been taken away.
  3. Using a drill, make two small holes into the door on the markings you created in the previous step (Ensuring the drill hole goes through both sides of the door)
  4. Place the hare back onto the door, aligning the screw holes on the hare with the two holes you’ve created.
  5. Using the screw provided, screw the hare to your door.
  6. Repeat the above step with the small plate ensuring that it is in the correct position for the bottom of the hare’s ring to knock on to.

Lion door knocker
  1. Place the Lion in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 3 holes are on the lion door knocker so that the pen can be visible on the door once the lion has been taken away.
  3. Using a drill, make 3 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the lion back onto the door, aligning the screw holes on the lion with the three holes you’ve created.
  5. Using the 3 screws provided, screw the lion to your door.

Elephant door knocker
  1. Place the elephant in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 2 holes are on the elephant door knocker so that the pen can be visible on the door once the elephant has been taken away.
  3. Using a drill, make 2 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the elephant back onto the door, aligning the screw holes on the elephant with the two holes you’ve created.
  5. Using the 2 screws provided, screw the elephant to your door.
  6. To attach the striking plate: Repeat the above step with the small plate ensuring that it is in the correct position for the bottom of the elephant ring to knock on to. Please ensure that this bolt is fed from the inside of the door and screwed into the striking plate which will be on the outside.

Bee with ring door knocker
  1. Place the bee with ring in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the 3 holes are on the bee with ring door knocker so that the pen can be visible on the door once the bee has been taken away.
  3. Using a drill, make 3 small holes into the door on the markings you created in the previous step (Ensuring you don’t go through both sides of the door)
  4. Place the bee back onto the door, aligning the screw holes on the bee with the three holes you’ve created.
  5. Using the 3 screws provided, screw the bee with ring to your door.
  6. To attach the striking plate: Repeat the above step with the small plate ensuring that it is in the correct position for the bottom of the bee ring to knock on to. Please ensure that this bolt is fed from the inside of the door and screwed into the striking plate which will be on the outside.

Honeycomb bee door knocker
  1. Place the honeycomb bee in the position you wish to attach it to your door.
  2. Using a marker/pen mark where the hole on the back of the door knocker so that the pen can be visible on the door once the honeycomb bee has been taken away.
  3. Using a drill, make a small hole into the door on the marking you created in the previous step (Ensuring the drill hole goes through both sides of the door)
  4. Place the honeycomb bee back onto the door, aligning the screw hole on the door knocker with the hole you’ve made.
  5. Using the screw provided, screw the door knocker to your door.
  6. Repeat the above step with the small plate ensuring that it is in the correct position for the bottom of the honeycomb bee ring to knock on to.
 
Brass bee Drawer Knobs
  1. The drawer knob should be placed against the unit it’s been fitted too and the screw screwed into the back of the drawer knob via the hole on the unit.
  2. From here you will be able to work out how much of the snap off screw needs to be removed. The snap off screws are simply snapped (Using pliers or something similar) at any of the points where the thread stops and then screwed back onto the drawer knob.
  3. We advise always taking small amounts of first to ensure you don’t remove too much of the snap off screw.